2003+ Dodge Commonrail 5.9L Cummins Diesel ATS Intake Manifold Arc Flow

03+ Dodge CR 24V Cummins ATS High Flow Intake Manifold from ATS Diesel Performance
_{[INT-D-24CR-xxxx]}

$349.00

03+ Dodge CR 24V Cummins ATS High Flow Intake Manifold

-Arc Flow Intake, 2003+ Dodge Common Rail 5.9L, Cummins, Pre tapped for Gauges and water injection,
Includes Powder Coating and Machining.

The ATS Intake Manifold offers these benefits:
The Arc-Flow intake manifold provides a smooth non-abstractive path for the air exiting the intercooler as it enters the engine. There is the one basic element that is required to produce power and reduce EGT's in a Diesel engine, that element is "Oxygen".
Oxygen is the key element of life, and oxygen is the key to the Diesel engine. Air volume provides the necessary element to efficiently burn the fuel that is injected into the combustion chamber.
The stock intake manifold on the Cummins 5.9L engine acts as a restrictor plate does on a NASCAR engine. A restrictor plate reduces the amount of air that can enter the engine limiting the overall power output.
The ATS Arc-Flow intake manifold allows the air to expand at a rate that does not create turbulence as it is fed into the cylinder head.
As the incoming air opens into a larger expansion area the air will tumble if expanded to quickly. The Arc-Flow intake is specially engineered to allow for maximum expansion of only 7 degrees providing a perfectly controlled expansion of air-flow into the cylinder head.
The Arc-Flow also comes pre-taped for perfect distribution of water injection. When looking for economy, towing or performance the Arc-Flow is the best add on that can be easily bolted to any Cummins 5.9L Diesel.

- Lowers Exhaust Gas Temperatures
- Better throttle response
- Superior Arc-flow design increases intake efficiency and air velocity over that of a stock intake manifold with much greater internal cross section. (see image - right)
- Ideal when upgrading your turbo.
- Shrouded back side of intake is pre-tapped for easy and clean gauge installation and other auxiliary inputs.
- Will not void warranty.
- Pre-tapped for water injection directly above the intake plenum.
anifold.

Dyno results show that the ATS Arc-flow's average gain is over 10 Horsepower and 21 lb/ft of Torque.

Available Options:
Intake Manifold Color:

Current Reviews: 1

This product was added to our catalog on Tuesday 16 January, 2007.

Quantity:

Customers who bought this product also purchased

Dodge 727/47RE/48RE Derale Transmission Pan 3qt increase	Boost Bolt for Boost Gauges
C2 0-1600 Degree Pyrometer Stepper Motor 7144	Quadzilla Boost fooler 03-07 Dodge 5.9L Cummins Diesel
C2 Boost Gauge 0-35PSI Non Stepper Motor 7104	ATS 3 Piece 03+ Commonrail Cummins Exhaust Manifold